2012 Program
| Sunday | |||
| 5-8 PM | Registration | ||
| 6-9 PM |
Reception
|
||
| Monday | |||
| 7-8 AM | Breakfast | ||
| 8-8:50 AM | Keynote | Lagrangian-Eulerian Methods for Sprays -- Shankar Subramaniam, Iowa State University | |
| Sessions | Experimental Methods & Instrumentation | Jet/Spray in Crossflow | |
| 9:00 AM |
Mapping of 3-D Liquid Mass Distribution Within Aerated-Liquid Jets
Using X-Ray Radiography K.-C. Lin, C. Carter, M. Brown, S. Smith, and A. Kastengren |
Fuel Jet in Cross Flow. Experimental Study of Spray Trajectories at
Elevated Pressures and Temperatures E. Lubarsky, D. Shcherbik, O. Bibik, B. Zinn, N. Patel, and M. Benjamin |
|
| 9:25 AM |
Spray Statistics and the Impact of Geometry in Gas-Centered Swirl
Coaxial Injectors M. Lightfoot, S.A. Schumaker, A. Kastengren, S. Danczyk, C. Powell |
“Grand Challenge” CFD Predictions of Jet in Crossflow: Comparison of
Eleven Independent CFD Results to Experimental Data C. Brown, U. Mondgragon, and V. McDonell |
|
| 9:50 AM |
Particle Size and Velocity Measurements using Light-field Velocimetry T. Nonn |
Experimental Study of Injection of Oil-Water Emulsions into a
Crossflow C. Bolszo, G. Gomez, and V. McDonell |
|
| 10:15-10:30 AM | Break | ||
| Sessions | Spray Characterization & Measurements | Atomization Simulation & Numerics | |
| 10:30 AM |
Spray and Atomization of a Micro-Variable Circular-Orifice Fuel
Injector M. Huo, K. Nithyanandan, C.-F. Lee, and D. Huo |
Towards direct numerical simulation of a pressure swirl injector M. Czajkowski and O. Desjardins |
|
| 10:55 AM |
Characterisation of Overlapping Flat Fan Sprays for Petroleum
Application G. C. Enyi, M.A.E. Kamkhi, G.G. Nasr, and M. Burby |
A Physics-Based Model for Numerical Simulation Through the Pinch-off
Singularity H. Gao, X. Li, M. Soteriou, and M. Arienti |
|
| 11:20 AM |
Development of Nonuniformities in Swirling, Rocket Injectors V. Narayanan, M. Lightfoot, L. Villasmil, S.A. Schumaker, S. Danczyk |
Detailed Numerical Simulation of Liquid Jet in Cross Flow Atomization:
Impact of Liquid Fuel Boundary Condition S. Ghods and M. Herrmann |
|
| 11:45 AM |
Spray Technology for Control of Reactor Selectivity M. Cloeter, H. Bai, S. Sen, and B. Smith |
Dynamics and Stability of Impinging Jets X. Chen, D. Ma, and V. Yang |
|
| 12:10-1:20 PM | Lunch | ||
| Sessions | Spray Modeling | Automotive Sprays | |
| 1:20 PM |
Comparing 1st and 2nd order turbulence models when solving the RANS
equations in Gas-Centered Swirl-Coaxial Injectors for Rocket Engine
Applications L.A. Villasmil Urdaneta, M.D.A. Lightfoot, and S.A. Danczyk |
Closed Loop Control of Sprays with Continuously Variable Geometry J.R. Archer, J.P. Lien, T. Fang, and G. Buckner |
|
| 1:45 PM |
Movable and adjustable air injection through concentrated sources of
mass and momentum for the atomization of polyurethane and the modeling
of droplet-fiber-interaction for the manufacturing process of
polyurethane-fiber-reinforced composites P. Diffo and P. Wulf |
Comparison of RANS and LES Turbulence Models Against Constant Volume
Diesel Experiments S. Som, P. Senecal, and E. Pomraning |
|
| 2:10 PM |
Development of a Low-Order Regression Model for Selected Flat Spray
Characteristics K. Bade, K. Cronce, and R. Schick |
Spray Calibration Study and IC Engine Modeling using ANSYS CFD S. Shrivastava, P. Mandloi, and A. Walavalkar |
|
| 2:35 PM |
Influence of mixture non-uniformity on the performance of an
effervescent nozzle K. Pougatch, M. Salcudean, and J. McMillan |
A Fully Resolved UWS Droplet Simulation D. Ryddner and M.F. Trujillo |
|
| 3:00 PM |
Study of Spray Induced Turbulence Using Large Eddy Simulations S. Banerjee and C. Rutland |
Experimental Study of Low-Pressure Fueling Under RCCI Engine Operation N.R. Walker, A. Dempsey, M.J. Andrie, and R.D. Reitz |
|
| 3:25-3:45 PM | Break | ||
|
3:45-4:45 PM
4:45 - 6:00 pm |
Technical Committees |
Computation and Modeling, Industrial and Agricultural Sprays Diesel and Automotive Sprays Poster Sessions |
S. Subramaniam & M. Herrmann K. Giles, J. Hecht, & J. Stamper S. Parrish & L. Markle
|
| Tuesday | |||
| 7-8 AM | Breakfast | ||
| 8-8:50 AM | Keynote | Diesel Spray Combustion Research for the Engine Combustion Network -- Lyle M. Pickett, Sandia National Laboratories | |
| Sessions | Environmental Sprays & Alternative Fuels | Internal/Near Nozzle Behavior | |
| 9:00 AM |
Treatment of Waste Water Using Spray and Atomization Techniques G.C. Enyi, G. Nasr, and M. Burby |
Measurement of liquid film thickness inside pressure swirl atomizers S. Yao and T. Fang |
|
| 9:25 AM |
Atomization Performance of Alternative Liquid Fuels in a
Swirl-Stabilized Research Combustor J. Legg, A. Narvaez, and V. McDonell |
Simulating cavitating flow in fuel injector nozzles with an
equilibrium-based model S. Rakshit and D. Schmidt |
|
| 9:50 AM |
Spray and atomization of diesel and biofuels using a single-hole
nozzle P.-C. Chen and T. Fang |
Evaluation of Cavitation in an Ejector for Multi-Liquid Mixing and
Atomization C. Mehring |
|
| 10:15-10:30 AM | Break | ||
| Sessions | Atomization Theory & Analysis | Droplet Sprays Impingement & Collisions | |
| 10:30 AM |
Development of Discrete Population Balance Mixture Atomization Model A. Jayanthi and J. Peddieson |
Oscillations in drop impacts on varying surfaces D. Banks, R. Sanchez, and G. Aguilar |
|
| 10:55 AM |
Experimental Investigation of Liquid Jet Breakup at Low Weber Number S. Rajendran, R. Manglik, and M. Jog |
Analysis of a Collision Model in a Co-Axial Liquid Fuel Spray in a
Heated Air Chamber X. Gu, S. Basu, and R. Kumar |
|
| 11:20 AM |
A Theory for Wave Propagation and Growth on Particle Laden Sheets
Produced During the Atomization of Suspensions of High Volume Fraction
of Solids F. Addo-Yobo |
Dynamics and Mass Transfer of Droplet Collisions X. Chen and V. Yang |
|
| 11:45 AM |
A Mechanistic Study of the Secondary Processes in Drop Formation
During the Atomization of Suspensions Using Hydraulic Spray Nozzles F. Addo-Yobo |
Comparisons between numerical simulations of an impinging jet and
droplet train S. Lewis and M.F. Trujillo |
|
| 12:10-1:30 PM | Lunch | ILASS Americas Annual Business Meeting and Award | Presentation |
| 1:30-2:30 PM | Technical Committees |
Spray Measurements and Instrumentation Physics of Atomization Rocket and Airbreathing, Power Fuel Atomization and Industrial Combustion
|
V. McDonell, A. Mansour, & D. Davis M. Jog & M. Hermann R. Jensen & A. Schumaker
|
| 2:35 PM | Depart for SwRI | ||
| 2:45-5:00 PM | SwRI Tours | Spray Application Tours at Southwest Research Institute | |
|
5:00 PM
5:45 pm |
Depart SwRI for Tejas Rodeo |
Rodeo and Texas Barbeque |
|
| 8:30 PM |
Departure for Hyatt
|
||
| Wednesday | |||
| 7-8 AM | Breakfast | ||
| 8-8:50 AM | Keynote | Analysis of Solid Particle Surface Impact Behavior in Turbomachines -- Klaus Brun, Southwest Research Institute | |
| Sessions | Droplet Phenomena | Internal/Near Nozzle Behavior | |
| 9:00 AM |
Thermocavitation within a droplet J.P. Padilla-Martinez, D. Banks, J.C. Ramirez-San-Juan, R. Ramos-Garcia, and G. Aguilar |
Simulations and Analysis of Fuel Flow in an Injector Including
Transient Needle Effects K. Neroorkar, C. Mitcham II, A. Plazas, R. Grover Jr., and D Schmidt |
|
| 9:25 AM |
Reduced Order Drag Modeling of Liquid Drops B. Helenbrook and J.C. Oefelein |
Investigation of Droplet Nucleation Inside A Beryllium Injector Using
Small Angle X-Ray Scattering (SAXS) Technique K.-C. Lin, C. Carter, S. Smith, B. Lee, and X. Zuo |
|
| 9:50 AM |
Formation of Liquid Sheets by Deposition of Droplets on a Surface A. Dalili, S. Chandra, C. Fan, and H. Kuo |
Velocity characterization of a flashing ethanol Jet with laser
correlation velocimetry H. Kamoun, G. Lamanna, B. Weigand, and J. Steelant |
|
| 10:15-10:30 AM | break | ||
| Sessions | Atomization Simulation & Numerics | Experimental Methods & Instrumentation | |
| 10:30 AM |
Breakup and Dynamics of Liquid Droplets P. Khare, X. Chen, and V. Yang |
Monitoring of collisions in fast droplet streams by real-time image
processing with line sensors Y. Baroud, S. Eggerstedt, M. Klaiber, R. Süverkrüp, A. Lamprecht, and S. Simon |
|
| 10:55 AM |
A priori and a posteriori Analysis of Turbulent Sprays W. Liu, S. Garrick, and M. Cloeter |
Development and application of a high-speed planar laser induced
fluorescence imaging system to evaluate liquid and vapor phases of
sprays from a multi-hole Diesel fuel injector S. Parrish and R. Zink |
|
| 11:20 AM |
Systematic Finite Volume Discretization for the Conservative, Robust
and Accurate Simulation of Multiphase Flows P. Brady and O. Desjardins |
Detailed Numerical Simulation of X-ray Phase Contrast Imaging in
Sprays M. Linne |
|
| 11:45 AM |
A Hybrid Re-initialization Scheme for the Augmented Level Set Method L. Anumolu and M.F. Trujillo |
Detailed Numerical Simulation of X-ray Radiography in Sprays M. Linne |
|
| 12:10-1:20PM | Lunch | ||
| Sessions | Medical & Biological Sprays | Automotive Sprays | |
| 1:20 PM |
Spray Coating in Health Environment M. Burby, G.G. Nasr, A. Nourian, and J. Stewart |
Experimental and numerical study on spray characteristics of
multi-hole type GDI injectors Y. Oh, S. Lee, and S. Park |
|
| 1:45 PM |
Optimal Parameters for Pulmonary Particle Deposition as Function of
Age L. Weber, R. Worden, and C. Lengsfeld |
Fuel Film Vaporization and Boiling on Engine Piston Tops T. Lee, D. Kyritsis, and C.-F. Lee |
|
| 2:10 PM |
Protein Aggregation During Ultrasonic Nebulization J. Giarratano, J. Carpenter, and C. Lengsfeld |
Effects of Injection Pressure and Ambient Temperature on Spray
Characteristics of Water Emulsified Diesel M. Huo, S.-L. Lin, H. Liu, and C.-F. Lee |
|
| 2:35 PM |
Towards Determining the Minimum Set of Moments Needed to Accurately
Represent Spray Data C. Sipperley and M. Archambault |
||
| 3:00 PM | Conference closes | ||